/****************************************************************************
**
** Copyright (C) 2021 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the documentation of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:FDL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
 * \title Qt Wayland Compositor Examples - IVI Compositor
 * \example ivi-compositor
 * \brief IVI Compositor is an example that demonstrates how to use the IviApplication extension.
 * \ingroup qtwaylandcompositor-examples
 *
 * \section1 Introduction
 *
 * This example demonstrates using the \l IviApplication shell extension in a Wayland display
 * server (also known as a Wayland compositor).
 *
 * For an introduction to the basic principles of creating a \l{Qt Wayland Compositor} with Qt,
 * see the \l{Qt Wayland Compositor Examples - Minimal QML}{Minimal QML example}.
 *
 * \section1 The Protocol
 *
 * \l IviApplication is a \l{Shell Extensions - Qt Wayland Compositor}{shell extension} that was
 * designed specifically for making In-vehice Infotainment systems.
 *
 * It is a minimalistic protocol, and only provides the following functionality:
 *
 * \list 1
 *   \li The client can identify itself with an \e{IVI-id}.
 *   \li The server can request that the client resizes itself.
 * \endlist
 *
 * \section2 The Identification Numbers
 *
 * In a typical \l IviApplication setup, you will have a predefined set of applications that can
 * connect to the server. Since these applications are already known when the system is designed,
 * they can be assigned hardcoded numbers that identify them. Given that the client and server
 * agree on these numbers ahead of time, semantics can be built into the ID numbers.
 *
 * For instance, if a client identifies itself as the navigation application, the server can
 * recognize this and allocate a large, centered part of the screen for its window. An application
 * identifying itself as a clock, on the other hand, might be delegated to a smaller area in the
 * margins of the screen.
 *
 * By default, Qt applications will advertise their system PIDs ("process IDs") as the \e{IVI-id}.
 * The client can override this by setting \c{QT_IVI_SURFACE_ID} in its environment before
 * connecting to the server.
 *
 * \section1 The Example
 *
 * A Qt Wayland Compositor may support multiple shell extensions at once, but the
 * \e{IVICompositor example} only supports the \l IviApplication protocol. This means that the
 * clients have to also support this shell extension in order to connect to the server.
 *
 * The compositor window in the example is split into two horizontally: A left area which is
 * designated for a specialized application with the id "1337", and a right area which is for all
 * other applications.
 *
 * \image ivi-compositor-1.png
 *
 * \section2 Creating the Layout
 *
 * The layout of the window is created inside a \l WaylandOutput. This typically corresponds to
 * a physical screen available to the compositor. If a single \l WaylandOutput is created, as in
 * the \e{IVICompositor example}, it will usually correspond to the primary screen.
 *
 * \snippet ivi-compositor/main.qml wayland output
 *
 * The code creates a \l WaylandOutput for the screen and creates a \l Window on this as the top
 * level container of all compositor contents. Inside this window, it creates two rectangles that
 * will serve as containers for applications as they connect.
 *
 * \section2 Connecting Clients
 *
 * If no additional configuration has been done, a Qt application will connect with an \e{IVI-id}
 * equal to its process ID. For instance, if we run the \l{Wiggly Example} with
 * \c{-platform wayland}, it will be delegated to the right-hand side of the layout, granted that
 * its ID is different from "1337".
 *
 * \image ivi-compositor-2.png
 *
 * However, if we set the \c{QT_IVI_SURFACE_ID} environment variable to "1337" before starting
 * the example, it will be delegated to the left-hand side of the layout.
 *
 * \image ivi-compositor-3.png
 *
 * When a client connects to the \c IVIApplication interface, it will emit the \c{iviSurfaceCreated}
 * signal. This is where the positioning of the application's surface is handled.
 *
 * \snippet ivi-compositor/main.qml connecting
 *
 * The \c{iviSurfaceCreated} signal receives an \l IviSurface argument which can be used to access
 * the client's ID. The compositor then creates a \l ShellSurfaceItem for the surface (as defined by
 * the \c chromeComponent). \c ShellSurfaceItem is the class used for placing shell surfaces into
 * the Qt Quick scene, and you will see this same pattern in all the Qt Wayland Compositor examples.
 *
 * What makes the \e{IVICompositor example} special is that it checks the \c iviId property of the
 * incoming shell surface and decides on a parent for the \l ShellSurfaceItem depending on what
 * this is. If the ID is equal to "1337" it will be parented to the \c leftArea, and if not it will
 * be in the \c rightArea.
 *
 * The implementation of the \l ShellSurfaceItem handles resizing by informing the client whenever
 * the size changes (which can happen if the compositor is running inside a desktop-style windowing
 * system and its window is resized).
 *
 * \snippet ivi-compositor/main.qml resizing
 *
 * The \c{sendConfigure()} method is defined in \l IviSurface and will send an event to the client.
 * The client will receive a resize event with the new size, so it can relayout its contents.
 *
 * If multiple applications connect to the same area in the layout, they will simply be stacked
 * according to normal Qt Quick ordering rules. There are no built-in mechanisms for closing
 * applications or managing state, but this can easily be added as ordinary Qt Quick code.
 */
